REVIEW ON PELLETIZATION: DRY POWDER LAYERING OF PELLETS USING TANGENTIAL SPRAY ROTOR PROCESSOR/INSERT
DOI:
https://doi.org/10.22159/ajpcr.2024v17i12.52611Keywords:
Powder layering, Glatt powder coater granulator (GPCG), Rotor insert, Tangential fluid bed, Pellet layeringAbstract
Pelletization turns fine powders or granules into small, round pellets for easy flow and handling. These pellets offer advantages such as improved absorption, modified drug release patterns & reduced irritation at application sites. Dry powder layering is gaining popularity in the pharmaceutical industry due to its cost and time efficiency. This method is an effective and straightforward process, can be alternative to liquid-based coating techniques. In recent years, active pharmaceutical ingredient layering onto multi-particulate core materials. One innovative pelletization method uses a rotor processor for powder layering. This process involves applying drug powder onto sugar spheres & spraying a binder solution to achieve uniform distribution and enhance drying efficiency. Compared to traditional methods, this dry powder layering is faster & more energy-efficient, reducing drying time & energy consumption. It is a streamlined and eco-friendly method as no solvent is required which makes it beneficial for pellet coating. This article provide insights on the powder layering technique with innovative fluid bed pelletizing technologies like rotor processor, glatt powder coater granulator series, tangential spray in the rotary insert, complex perfect sphere insert and glatt procell series & their applications.
Downloads
References
Patel HP, Patel JK, Patel PR, Patel MP. Pellets: A general overview. Int J Curr Res Rev. 2010 Jun 6;2(20):21-31.
Khambat SB, Kale AS. A Review extended release oral drug delivery system and Multiparticulate Drug Delivery Systems (MDDS). Int J Sci Res Sci Technol. 2020 Feb 5;7:84-92.
Srinivasarao K, Jyothirmai KS, Rao NR. Pellets and pelletization techniques: A review. Int J Res Pharm Chem. 2017;7(2):141-7.
Hirjau M, Nicoara AC, Hirjau V, Lupuleasa D. Pelletization techniques used in pharmaceutical fields. Pract Farm. 2011;4(3-4):206-11.
Chen T, Li J, Chen T, Sun CC, Zheng Y. Tablets of multi-unit pellet system for controlled drug delivery. J Control Release. 2017;262:222-31. doi: 10.1016/j.jconrel.2017.07.043, PMID: 28774838
Korakianiti ES, Rekkas DM, Dallas PP, Choulis NH. Optimization of the pelletization process in a fluid-bed rotor granulator using experimental design. AAPS PharmSciTech. 2000;1(4):71-5. doi: 10.1208/pt010435
Kumari MH, Samatha K, Balaji A, Uma Shankar MS. Recent novel advancements in pellet formulation: A review. Int J Pharm Sci Res. 2013;4(10):3803-22.
Teng Y, Qiu Z. Fluid bed coating and granulation for CR delivery. In: Oral Controlled Release Formulation Design and Drug Delivery: Theory to Practice. United States: Wiley; 2010. p. 115-27.
Vuppala MK, Parikh DM, Bhagat HR. Application of powder-layering technology and film coating for manufacture of sustained-release pellets using a rotary fluid bed processor. Drug Dev Ind Pharm. 1997;23(7):687-94. doi: 10.3109/03639049709150770
Deb R, Ahmed AB. Pellets and pelletization techniques: A critical review. Int Res J Pharm. 2016;4(4):90-5. doi: 10.7897/2230-8407.04414
Mohylyuk V, Styliari ID, Novykov D, Pikett R, Dattani R. Assessment of the effect of Cellets’ particle size on the flow in a Wurster fluid-bed coater via powder rheology. J Drug Deliv Sci Technol. 2019;54:101320. doi: 10.1016/j.jddst.2019.101320
Nguyen TT, Anton N, Vandamme TF. Oral pellets loaded with nanoemulsions. In: Nanostructures for Oral Medicine. Amsterdam: Elsevier Inc.; 2017. p. 203-30.
Muley S, Nandgude T, Poddar S. Extrusion-spheronization a promising pelletization technique: In-depth review. Asian J Pharm Sci. 2016;11(6):684-99. doi: 10.1016/j.ajps.2016.08.001
Gryczová E, Rabišková M, Vetchý D, Krejčová K. Pellet starters in layering technique using concentrated drug solution. Drug Dev Ind Pharm. 2008 Dec;34(12):1381-7. doi: 10.1080/03639040802130046, PMID: 18618309
Zakowiecki D, Szczepanska M, Hess T, Cal K, Mikolaszek B, Paszkowska J, et al. Preparation of delayed-release multiparticulate formulations of diclofenac sodium and evaluation of their dissolution characteristics using biorelevant dissolution methods. J Drug Deliv Sci Technol. 2020;60:101986. doi: 10.1016/j.jddst.2020.101986
Kállai-Szabó N, Lengyel M, Farkas D, Barna ÁT, Fleck C, Basa B, et al. Review on starter pellets: Inert and functional cores. Pharmaceutics. 2022;14(6):1299. doi: 10.3390/pharmaceutics14061299, PMID: 35745872
Majeed SM, Al-Shaheen MK, Al-Zidan RN, Mahmood SM. Multiple Unite Pellet Systems (MUPS) as drug delivery model. J Drug Deliv Ther. 2020;10(6):231-5. doi: 10.22270/jddt.v10i6.4389
Možina M, Tomaževič D, Leben S, Pernuš F, Likar B. Digital imaging as a process analytical technology tool for fluid-bed pellet coating process. Eur J Pharm Sci. 2010 Sep 11;41(1):156-62. doi: 10.1016/j. ejps.2010.06.001, PMID: 20541010
Naidu VR, Deshpande RS, Syed MR, Wakte PS. Real-time imaging as an emerging process analytical technology tool for monitoring of fluid bed coating process. Pharm Dev Technol. 2018 Jul 3;23(6):596-601. doi: 10.1080/10837450.2017.1287730, PMID: 28121263
Avalle P, Pollitt MJ, Bradley K, Cooper B, Pearce G, Djemai A, et al. Development of Process Analytical Technology (PAT) methods for controlled release pellet coating. Eur J Pharm Biopharm. 2014;87(2):244-51. doi: 10.1016/j.ejpb.2014.01.008, PMID: 24503256
Behzadi SS, Toegel S, Viernstein H. Innovations in coating technology. Recent Pat Drug Deliv Formul. 2008;2(3):209-30. doi: 10.2174/187221108786241633, PMID: 19075909
Porter SC. Coating of Pharmaceutical Dosage Forms. Netherland: Elsevier; 2020. p. 551-64.
Feng H, Mohan S. Application of process analytical technology for pharmaceutical coating: Challenges, pitfalls, and trends. AAPS PharmSciTech. 2020;21(5):179. doi: 10.1208/s12249-020-01727-8, PMID: 32596747
Korasa K, Vrečer F. Overview of PAT process analysers applicable in monitoring of film coating unit operations for manufacturing of solid oral dosage forms. Eur J Pharm Sci. 2018;111:278-92. doi: 10.1016/j. ejps.2017.10.010, PMID: 29020609.
Knop K, Kleinebudde P. PAT-tools for process control in pharmaceutical film coating applications. Int J Pharm. 2013;457(2):527-36. doi: 10.1016/j.ijpharm.2013.01.062, PMID: 23380626
Ranjitha KS, Ganesh NS, Megha J, Chandy V. A study on pellets, pelletization techniques and its evaluation parameters-a review. World J Pharm Pharm Sci. 2021;10:850-63.
Afsana KGA, Ariful IK. Formulation and evaluation of domperidone pellets prepared by powder layering technology. Asian J Pharm. 2010;4:41-7.
Gaur PK, Mishra S, Bhardwaj S, Kumar SS, Bajpai M, Verma A, et al. Recent developments for oral time controlled drug delivery by pelletization techniques: An overview. Int J Pharmcol Pharm Sci. 2015 Jul 21;1(4):283-95.
Glatt Process Technologies Food, Feed and Fine Chemicals. Layering of Active Substances for Food, Feed and Fine Chemicals. Glatt Technologies Food, Feed and Fine Chemicals; 2022 Sep 21.
Sirisha VR, Vijaya Sri K, Suresh K, Reddy GK, Devanna N. A review of pellets and pelletization process-a multiparticulate drug delivery system. Int J Pharm Sci Res. 2013;4(6):2145-58.
Pundlikrao Ige P, Patil N, Khadse SC, Ige PP. Review on novel granulation techniques. World J Pharm Res. 2016;5:1-6.
Singh SK, Durrani MJ, Karnachi AA, Khan MA. Optimization and characterization of controlled release pellets coated with an experimental latex: I. Anionic drug. Int J Pharm. 1995;125(2):243-55. doi: 10.1016/0378-5173(95)00135-6
Bathool A, Vishakante GD, Khan MS, Gupta VK. Pelletization as a key tool for oral drug delivery: A review. J Pharm Res. 2011;4(10):3282-6.
Park ES, Lee DS, Kwon SY, Chi SC. A new formulation of controlled release amitriptyline pellets and its in vivo/in vitro assessments. Arch Pharm Res. 2003;26(7):569-74. doi: 10.1007/BF02976883, PMID: 12934651
Yadav N, Verma A. Pharmaceutical pellets: A versatile carrier for oral controlled delivery of drugs. Indian J Pharm Educ Res. 2016;50(3s):S146-60. doi: 10.5530/ijper.50.3.27
Shelke TT, Aher UD, Patel EP. Recently used technologies in Pellet Formulation-A Review. PharmTutor. 2017;5(7):22-30.
Patel NV, Patel JK, Shah SH, Patel JN. Central composite design for the formulation and optimization of a multi-unit potential colonic drug delivery system of budesonide for ulcerative colitis. Pharmazie. 2011 Mar;66(2):124-9. PMID: 21434575
Vuppala MK, Parikh DM, Bhagat HR. Application of powder-layering technology and film coating for manufacture of sustained-release pellets using a rotary fluid bed processor. Drug Dev Ind Pharm. 1997;23(7):687-94.
Nastruzzi C, Cortesi R, Esposito E, Genovesi A, Spadoni A, Vecchio C, et al. Influence of formulation and process parameters on pellet production by powder layering technique. AAPS PharmSciTech, 2000;1(2):14-25.
Cerea M, Foppoli A, Maroni A, Palugan L, Zema L, Sangalli ME. Dry coating of soft gelatin capsules with HPMCAS. Drug Dev Ind Pharm. 2008 Nov;34(11):1196-200. doi: 10.1080/03639040801974360, PMID: 18720149
Kovacevic J, Mladenovic A, Djuris J, Ibric S. Evaluation of powder, solution and suspension layering for the preparation of enteric coated pellets. Eur J Pharm Sci. 2016 Mar 31;85:84-93. doi: 10.1016/j. ejps.2016.01.018, PMID: 26796145
Eskandari S, Varshosaz J, Akhavanfarid G, Hafizi G. Formulation and in-vitro characterization of extended release pellets of indomethacin using powder-layering technique. Res Pharm Sci. 2009;2(2):67-75.
Heinicke G, Matthews F, Schwartz JB. The effects of substrate size, surface area, and density on coat thickness of multi-particulate dosage forms. Pharm Dev Technol. 2005;10(1):85-96. doi: 10.1081/pdt-49670, PMID: 15776816
Engels S. Dry Polymer Layering Using a Rotor Processor (Patent No. US20100034967A1). U.S.; 2010.
Pundlikrao Ige P, Patil N, Khadse SC, Ige PP. Review on novel granulation techniques. World J Pharm Res. 2016;5:1-6.
Scoggins M, Sidwell R, Crawford R. Innovative Reformulation of a Complex, High-Drug-Load, Modified Release Dosage Form with Reduced Dosing Frequency. Pennsylvania: Clinical Leader; 2021.
Vaphare AM, Banerjee DSK, Gadhave MV, Gaikwad DD. Pelletalization Techniques: A Review. Asian J Pharm Res Dev 2014;2(3):103-114.
Zaman M, Saeed-Ul-Hassan S, Sarfraz RM, Batool N, Qureshi MJ, Akram MA, et al. Pellets and pelletization: Emerging trends in the pharma industry. Acta Pol Pharm Drug Res 2016;73:1415-25.
Tomuta I, Leucuta SE. Use of experimental design for identifying the most important formulation and technological variables in pelletization by powder layering. J Drug Deliv Sci Technol. 2004;14(3):215-21. doi: 10.1016/S1773-2247(04)50103-X
Kandukuri JM, Allenki V, Eaga CM, Keshetty V, Jannu KK. Pelletization techniques for oral drug delivery. Int J Pharm Sci Drug Res. 2009;1(2):63-70.
Taylor D. Feasibility of Taste-masking a Highly Soluble Drug ViaPowder Layering with Fine Particle Ethyl Cellulose. In: AAPS Annual Meeting. USA: American Association of Plastic Surgeons; 2015.
Meenakshi B, Harsha S. Multiple unit particulate system: Pelletization techniques: An overview. Int J Pharm Erudition. 2012;2(2):28-39.
Kovacevic J, Ibric S, Djuris J, Kleinebudde P. Application of the design of experiments in optimization of drug layering of pellets with an insight into drug polymer interactions. Int J Pharm. 2016 Jun 15;506(1-2):312-9. doi: 10.1016/j.ijpharm.2016.04.030, PMID: 27094356
Kristensen J, Hansen VW. Wet granulation in rotary processor and fluid bed: Comparison of granule and tablet properties. AAPS PharmSciTech. 2006;7(1):E153-62. doi: 10.1208/pt070122, PMID: 28290037
Winkler M. Rotor Technology for Dry Powder Coating. Israel: Freund Publishing House Ltd.; 2022 Jun 17.
Faculty of Pharmacy, Division of Pharmaceutical Chemistry and Technology, Discipline of Industrial Pharmacy, Astra Zeneca. Dry Powder Layering of High Viscosity Polymers Using A Fluidized Bed Rotor Granulator. Helsinki: University of Helsinki; 2014.
Cerea M, Nespoli S, Del Curto MD, Foppoli A, Maroni A, Gazzaniga A. Design and preparation of zero-order prolonged release systems based on hydrophilic polymers obtained with a non-uniform drug distribution. AAPS J. 2012:1.
Gauthier P, Cardot JM, Beyssac E, Aiache JM. Study of the influence of coating methods on lipid spheres manufactured on rotor fluidized bed process. Pharm Dev Technol. 2018;23(6):655-62. doi: 10.1080/10837450.2017.1356331, PMID: 28714756
Sauer D, Cerea M, Dinunzio J, McGinity J. Dry powder coating of pharmaceuticals: A review. Int J Pharm 2013;457:488-502.
Smikalla M, Mescher A, Walzel P, Urbanetz NA. Impact of excipients on coating efficiency in dry powder coating. Int J Pharm. 2011 Feb 28;405(1-2):122-31. doi: 10.1016/j.ijpharm.2010.12.001, PMID: 21145382.
Kablitz CD, Harder K, Urbanetz NA. Dry coating in a rotary fluid bed. Eur J Pharm Sci. 2006 Feb;27(2-3):212-9. doi: 10.1016/j. ejps.2005.10.001, PMID: 16290285
Foppoli AA, Maroni A, Cerea M, Zema L, Gazzaniga A. Dry coating of solid dosage forms: An overview of processes and applications. Drug Dev Ind Pharm. 2017;43(12):1919-31. doi: 10.1080/03639045.2017.1355923, PMID: 28707494
Ahtola M. Dry Powder Layering of High Viscosity Polymers Using a Fluidized Bed Rotor Granulator. Master’s thesis; 2014.
Chen Y, Liu Y, Wu C, Pan X, Peng T. Dry suspension containing coated pellets with pH-dependent drug release behavior for the taste-masking of azithromycin. AAPS PharmSciTech. 2022;24(1):21. doi: 10.1208/ s12249-022-02484-6, PMID: 36526883
Menendez CJ. A Novel Approach for the Manufacturing of Extended Release [Pellets Doctoral Dissertation]. Ohiolink Electronic Theses and Dissertations Center, University of Cincinnati; 2003.
Li F, Zheng X, Bao Y, Chen T, Zeng J, Xu X, et al. Fenofibrate modified-release pellets with lag phase and high oral bioavailability. Drug Des Dev Ther. 2019;13:141-51. doi: 10.2147/DDDT.S179266, PMID: 30613135
Sinchaipanid N, Chitropas P, Mitrevej A. Influences of layering on theophylline pellet characteristics. Pharm Dev Technol. 2004;9(2):163-70. doi: 10.1081/pdt-120030246, PMID: 15202575
Yamamoto K, Shao Z. Process Development, Optimization, and Scale-up. Netherlands: Elsevier; 2017. p. 77-792.
Missaghi S, Young C, Fegely K, Rajabi-Siahboomi AR. Delayed release film coating applications on oral solid dosage forms of proton pump inhibitors: Case studies. Drug Dev Ind Pharm. 2010 Jan 21;36(2):180-9. doi: 10.3109/03639040903468811, PMID: 20070183
Jones DM, Rajabi-Siahboomi AR. Fluid bed technology, process robustness, and scale-up. In: Multiparticulate Drug Delivery: Formulation, Processing and Manufacturing. Cham: Springer; 2017. p. 65-93.
Robert, Pisek O, Planinsek M, Tus S, Srčič. Influence of rotational speed and surface of rotating disc on pellets produced by direct rotor pelletization. Pharm Ind. 2000;62(4):312-9.
Laboratory Systems in the Glatt Technology Center Weimar. Lab Scale for Calcination, Drying, Granulation, Microencapsulation, Coating. Glatt Technologies Food, Feed and Fine Chemicals; 2022 Dec 14.
Glatt Process Technologies Food, Feed and Fine Chemicals. Designs and Series of Fluid Bed and Spouted Bed Systems. Glatt Technologies Food, Feed and Fine Chemicals; 2022 Sep 23.
Tsotsas E, Mujumdar AS. Modern Drying Technology, Product Quality and Formulation. Vol. 3. United States: Wiley; 2011.
Pulgamwar GV. Fluid bed technology: A review. Int J Pharm Res Biosci. 2015;4:89-110.
Foppoli A, Cerea M, Palugan L, Zema L, Melocchi A, Maroni A, et al. Evaluation of powder-layering vs. spray-coating techniques in the manufacturing of a swellable/erodible pulsatile delivery system. Drug Dev Ind Pharm. 2020;46(8):1230-7. doi: 10.1080/03639045.2020.1788060, PMID: 32597251
Wargo DJ. Near-Infrared Analysis and Process Control of Pharmaceutical Pelletization Processes. United States: Duquesne University; 2009.
Langner M, Zhou B, Priese F, Wolf B. Statistical investigation of rotary fluidized bed agglomeration process with tangential spray and in-line particle size measurement for PAT process control. Processes. 2023 Apr 1;11(4):1066. doi: 10.3390/pr11041066
Srivastava S, Mishra G. Fluid bed technology: Overview and parameters for process selection. Int J Pharm Sci Drug Res. 2010;2(4):236-46.
Suhrenbrock L, Radtke G, Knop K, Kleinebudde P. Pellet layering: Scale-up considerations using different kinds of processing equipment. Drug Dev Ind Pharm. 2012 Dec;38(12):1494-503. doi: 10.3109/03639045.2011.653815, PMID: 22452570
Pollinger-Tieg C. Development and Investigation of Propranolol HCl Pellets Coated with Poly (Vinyl Acetate) Based Polymer Films for Sustained Release Applications [PhD dissertation]. Halle: Martin Luther University Halle-Wittenberg; 2012.
Bhairy SR, Habade BM, Gupta SK, Ghodke VR, Girkar YK, Kuchekar SK. Pellets and pelletization as Multiparticulate Drug Delivery Systems (MPDDS): A conventional and novel approach. Int J Inst Pharm Life Sci. 2015 5;83:79-126.
Pasic M. Study to Design Stable Lansoprazole Pellets. [PhD dissertation]. Germany: University of Freiburg; 2008.
Glatt Integrated Process Solutions. Available from: https://www.glatt. com/wp-content/uploads/2021/03/glatt_bro_ptp_026_ws_2019-04_ en.pdf
Priese F, Frisch T, Wolf B. Comparison of film-coated retarded release pellets manufactured by layering technique or by bed rotor pelletization. Pharm Dev Technol. 2015 Jun 1;20(4):417-25. doi: 10.3109/10837450.2013.879883, PMID: 24483364
McGinity JW, Felton LA. Aqueous Polymeric Coatings for Pharmaceutical Dosage Forms. United Kingdom: Informa Healthcare; 2008. p. 488.
Chen H, Rustagi S, Diep E, Langrish TA, Glasser BJ. Scale-up of fluidized bed drying: Impact of process and design parameters. Powder Technol. 2018 Nov 1;339:8-16. doi: 10.1016/j.powtec.2018.07.087
Jeon IJ. In: Neubert R, Süß W, Kleinebudde P, editors. Development and Formulation of Carbomer 934P-Containing Mucoadhesive Pellets by fluid-bed Techniques. Halle: Martin-Luther-Universität Halle- Wittenberg; 2007. Available from: https://opendata.uni-halle.de/ bitstream/1981185920/9510/1/prom.pdf
Maniyar D, Kadu P, Baig MI. Critical variables affecting the layering method of pelletization. Future J Pharm Sci. 2023 Aug 14;9(1):68. doi: 10.1186/s43094-023-00522-z
Dumpala R, Patil C. A review on pellets and pelletization techniques. Int J Trend Innov Res. 2020;2(4):9-21.
Wesdyk R, Joshi YM, Jain NB, Morris K, Newman A. The effect of size and mass on the film thickness of beads coated in fluidized bed equipment. Int J Pharm. 1990;65(1-2):69-76. doi: 10.1016/0378- 5173(90)90011-R
Seo KS, Bajracharya R, Lee SH, Han HK. Pharmaceutical application of tablet film coating. Pharmaceutics. 2020 Sep 1;12(9):853. doi: 10.3390/ pharmaceutics12090853, PMID: 32911720
Gupta VK, Beckert TE, Price JC. A novel pH- and time-based multi-unit potential colonic drug delivery system. I. Development. Int J Pharm. 2001;213(1-2):83-91. doi: 10.1016/S0378-5173(00)00649-9
Iyer RM, Augsburger LL, Parikh DM. Evaluation of drug layering and coating: Effect of process mode and binder level. Drug Dev Ind Pharm. 1993;19(9):981-98. doi: 10.3109/03639049309062996
Suresh K, Sharma S. Pellets and palletisation: A review article. J Orient Res Madras 2021;6(8):XCII-XLII:113-118.
Pai R, Pai A, Srivastava B, Kohli K. Development and in vitro evaluation of ketoprofen extended release pellets using powder layering technique in a rotary centrifugal granulator. Comb Chem High Throughput Screen. 2011;14(2):138-45. doi: 10.2174/138620711794474042, PMID: 21118082
Bouffard J, Dumont H, Bertrand F, Legros R. Optimization and scale-up of a fluid bed tangential spray rotogranulation process. Int J Pharm. 2007 Apr 20;335(1-2):54-62. doi: 10.1016/j.ijpharm.2006.11.022, PMID: 17166677
Song Y, Zhou T, Bai R, Zhang M, Yang H. Assessment of the coating quality in a top-spray fluidized bed coater: An experimental study. Powder
Technol. 2024 Apr 15;439:119663. doi: 10.1016/j.powtec.2024.119663
Pawar A, Bahulikar SR. Design and development of tangentital spray rotogranulation mechanism. Int J Sci Technol Eng. 2016;2:1036-41.
Agrawal S, Fernandes J, Shaikh F, Patel V. Quality aspects in the development of pelletized dosage forms. Heliyon. 2022;8(2):e08956. doi: 10.1016/j.heliyon.2022.e08956, PMID: 35243077
Dreu R, Luštrik M, Perpar M, Žun I, Srčič S. Fluid-bed coater modifications and study of their influence on the coating process of pellets. Drug Dev Ind Pharm. 2012 Apr;38(4):501-11. doi: 10.3109/03639045.2011.617754, PMID: 21962028
Anderson R, Oren PL, Ogura T, Fujii T. Duloxetine Enteric Pellets United States Patent (19). Japan: Shionogi and Co Ltd.; 1996 Apr.
Thompson TS, Barker ER. Method for Applying a Powder Coating United States (12) Patent Application Publication. United States: Sherwin Williams Co; 2013 Feb.
Taylor D, Mcclain JB. Polymer Films for Medical Device Coating Australian Patent. Durham: MiCell Technologies Inc.; 2014 Oct.
Oshlack B, Pedi F Jr. Powder-layered Morphine Sulfate Formulation United States Patent 19. United States: Purdue Pharma LP; 1995 May.
Engels SM. Polymer Coating Process Using Dry Related U.S. Application Data Glidant in A Rotor Processor (60) Provisional Application No. 61/087,083; 2008.
Varshosaz J, Tavakoli N, Serri A. Preparation and in vitro characterization of piroxicam enteric coated pellets using powder layering technique. Pharm Dev Technol. 2009;14(3):305-11. doi: 10.1080/10837450802626288, PMID: 19519183
Mazumder R, Mahanti B, Majumdar S, Pal R, Chowdhury AD. Response surface method for optimization of prepared satranidazole powder layered pellets. Futur J Pharm Sci. 2021 Dec;7(1):190. doi: 10.1186/s43094-021-00337-w
Young J, Kurt CF, Rajabi RA. ACRYL-EZE Application Data Aqueous Acrylic Enteric System Application of Powder Layering Technology and Aqueous Enteric Coating of Lansoprazole. Harleysville, PA: Colorcon Inc.; 2016 Nov.
Published
How to Cite
Issue
Section
Copyright (c) 2024 Ritik Ramdhani, Purnima Amin, Suraj Bhatt
This work is licensed under a Creative Commons Attribution 4.0 International License.
The publication is licensed under CC By and is open access. Copyright is with author and allowed to retain publishing rights without restrictions.
