Cu AND Zn SUBSTITUTED HYDROXYAPATITE COATINGS ON TiO2 NANOTUBES FORMED BY ELECTROCHEMICAL METHODS

Authors

  • SUBHASMITA SWAIN Biomaterials and Tissue Regeneration Laboratory, Centre of Excellence in Theoretical and Mathematical Sciences, Siksha ‘O’ Anusandhan University, Khandagiri Square, Bhubaneswar – 751030, Odisha, India
  • TAPASH RANJAN RAUTRAY

Abstract

 

ABSTRACT

Objective

Hydroxyapatite (HA) coatings on TiO2 nanotubes (TNT) provide osteoconduction and hence promote bone healing and apposition, leading to the rapid biological fixation of implants. In the current study, TNT surfaces were formed by electrochemical anodization technique and Cu and Zn were simultaneously substituted in HA coating so as to form a coating with antibacterial properties with good osteoconductive surface.

 

Methods:

Ion substituted HA coatings such as Cu-HA and Zn-HA were deposited cathodically on TNT surfaces. This work elucidated the antibacterial effect and cytocompatibility of Cu and Zn substituted HA coating on TNT. To improve the antibacterial property of pure HA, Cu and Zn were substituted into its structure.

 

Results:
XRD of the coatings showed the formation of Cu-HA and Zn-HA while PIXE confirmed the coatings to be calcium deficient. MTT assay was employed to assess the cell survival rate of Cu-HA and Zn-HA coatings with osteoblast-like cells.

 

Conclusion:

While both the coating showed good bioactivity, better cell activities were observed in case of Zn-HA coating. Better cell activities on Zn-HA may be attributed to the cytocompatibility nature of Zn-HA and because of its higher roughness. 

Author Biography

SUBHASMITA SWAIN, Biomaterials and Tissue Regeneration Laboratory, Centre of Excellence in Theoretical and Mathematical Sciences, Siksha ‘O’ Anusandhan University, Khandagiri Square, Bhubaneswar – 751030, Odisha, India

Assistant Prof, Biomaterials and Tissue Regeneration Laboratory, Centre of Excellence in Theoretical and Mathematical Sciences, Siksha ‘O’ Anusandhan University, Khandagiri Square, Bhubaneswar – 751030, Odisha, India

References

T.R. Rautray, R. Narayanan, T.Y. Kwon, and K.H. Kim, J. Biomed. Mater. Res. B, 2010, vol. 93B, pp. 581-591.

T.R. Rautray, R. Narayanan, and K.H. Kim, Prog. Mater. Sci., 2011, vol. 56, pp. 1137 -1177.

Y. Wang, C. Wen, P. Hodgson, and Y. LI, J. Biomed. Mater. Res.A, 2014, vol.102A, pp. 743–751.

K. S. Brammer, H. Kim, K. Noh, M. Loya, C. J. Frandsen, L. Chen, L. S. Connelly and S. Jin, Adv. Eng. Mater., 2011, vol. 13, pp. B88-B94.

C. H. Chang, H. C. Lee, C. C. Chen, Y. H. Wu, Y. M. Hsu, Y. P. Chang, T. Yang, and H. W. Fang, J. Biomed. Mater. Res.A, 2012, vol. 100A, pp. 1687–1695.

Y. Wang, C. Wen, P. Hodgson, and Y. LI, J. Biomed. Mater. Res.A, 2014, vol.102A, pp. 743–751.

S. H. Oh, R. R. Finones, C. Daraio, L.Chen and S. Jin, Biomater. 2005, vol. 26, pp. 4938–4943.

S. Sobieszczyk and R. Klotzke, Adv. Mater. Sci., 2011, vol. 11, pp. 17-26.

T.R. Rautray, R. Narayanan, T.Y. Kwon, and K.H. Kim, Thin Solid Films, 2010, vol. 518, pp. 3160-3163.

E. S. Thian , J. Huang , M.E. Vickers , S.M. Best , Z.H. Barber , W. Bonfield , Journal of Materials Science, 2006, vol. 41, pp. 709.

Y. Huang, H. Zenga, X. Wang, D. Wang, Applied Surface Science, 2014, vol.290, pp. 353– 358

H. Hu, W. Zhang , Y. Qiao , X. Jiang , X. Liu, C. Ding , Acta Biomaterialia, 2012, vol.8, pp.904–915

F. Bir , H. Khireddinea, A. Touatib, D. Sidanea, S. Yalaa, H. Oudadesse, Applied Surface Science, 2012, vol. 258, pp. 021– 7030

Z. Radovanovic, B. Jokic, D. Veljovic, S. Dimitrijevic,V. Kojic, R. Petrovic, D. Janackovic, Applied Surface Science, 2014, vol. 307, pp. 513–519

K. Huo, X. Zhang , H. Wang, L. Zhao , X. Liu , P. K. Chu, Biomaterials, 2013, vol. 34, pp. 3467-3478

S. Zhao, W. Dong, Q. Jiang, F. He, X. Wang, G. Yang, Biomed & Biotechnol, 2013, vol.14, pp.518-525.

T. R. Rautray, S. Swain and K. H. Kim, Adv. Sci. Lett., 2014, vol. 20, pp. 801-803.

Y. Huang, S. G. Han, Q. Q. Ding, Y. J. Yan and X. F. Pang, Spectrosc. Spectral Anal., 2013, vol. 33. pp. 2379-2382.

T. R. Rautray, B. Mohapatra and K. H. Kim, Adv. Sci. Lett., 2014, vol. 20, pp. 879-81.

K. W. Lee, C. M. Bae, J. Y. Jung, G. B.Sim, T. R. Rautray, H. J. Lee, T. Y. Kwon, and K. H. Kim, J. Biomed. Mater. Res., 2011, vol. 98B, pp. 395-407.

ASTM C633-79, 1980.

R. Narayanan, T. Y. Kwon and K. H. Kim, Mater. Chem. Phys., 2009, vol. 117, pp. 460–464.

T. R. Rautray, V. Vijayan and S. Panigrahi, Eur. J. Gastroenterol. Hepatol, 2006, vol. 18, pp. 999-1003.

A Kar, K. S. Raja and M. Misra, Surf. Coat. Technol., 2006, vol. 201, pp. 3723–3731

Z. Mohammadi, A. A. Ziaei-moayyed and A. M.Sheikh-mehdi, Appl. Surf. Sci., 2007, vol. 253, pp. 4960-65.

Published

01-07-2016

How to Cite

SUBHASMITA SWAIN, & TAPASH RANJAN RAUTRAY. (2016). Cu AND Zn SUBSTITUTED HYDROXYAPATITE COATINGS ON TiO2 NANOTUBES FORMED BY ELECTROCHEMICAL METHODS. Innovare Journal of Engineering and Technology, 4(3), 7–10. Retrieved from https://mail.innovareacademics.in/journals/index.php/ijet/article/view/13892

Issue

Section

Original Article(s)

Most read articles by the same author(s)