THE CHARACTERIZATION OF ANGWA-KEDE LITHIUM ORE, KOKONA LOCAL GOVERNMENT AREA, NASARAWA STATE, NIGERIA

EBIKEMEFA EBIMOBOWEI CLINTON; RAMALAN ALIYU MOHAMMED; DUNGKA THOMAS

doi:10.22159/ijss.2024v12i5.52364

Authors

EBIKEMEFA EBIMOBOWEI CLINTON Department of Metallurgical and Materials Engineering, Ahmadu Bello University, Kaduna State, Nigeria
RAMALAN ALIYU MOHAMMED Department of Metallurgical and Materials Engineering, Ahmadu Bello University, Kaduna State, Nigeria
DUNGKA THOMAS Department of Metallurgical and Materials Engineering, Ahmadu Bello University, Kaduna State, Nigeria.

DOI:

https://doi.org/10.22159/ijss.2024v12i5.52364

Keywords:

Lithium Ore, Lithium demand, Lithium Mineralogy, Lithium Characterization

Abstract

This research on the characterization of Angwa-Kede lithium ore, Kokona Local Government Area, Nasarawa State, Nigeria was carried out to identify the mineralogical content, elemental composition and the percentage content of lithium(Li) present in the ore. The research employed a systematic sampling method for obtaining lithium ore at various lithium mine pit and a weight sample of 100g was pulverized and analyzed using XRF for elemental characterization, XRD for identification of mineralogical phases and Flame Test analysis for identification of lithium concentration. The Flame Test result revealed that lithium concentration in the ore samples from the mining pit sites are found to be 0.3 and 1.85% respectively and thus are low grade lithium ores. The XRD results revealed that the mineral phases in the lithium ore are: quartz, albite and muscovite as major phases while petalite, lepidolite and spodumene are the minor phases in the matrix of the ore samples. XRF result shows that: Al, Cl, S, Si, Mg, K, Ca, Fe and P have percent significance values and are the major elements while others like Cu, Ti, Mo, Sr etc. have minor percent values (minor elements). Conclusively, a more appropriate beneficiation process can aid in increasing the grade of the ore and this can be beneficial to the nation’s metallurgical industry.

References

Agusdinata, D. B., Liu, W., Eakin, H., & Romero, H. (2018). Socioenvironmental impacts oflithium mineral extraction: Towards a research agenda. Environmental Research Letters, 13,123001.

Azevedo, M.; Baczy ´nska, M.; Hoffman, K.; Krauze (2022): A. Lithium Mining: How New Production Technologies Could Fuel the Global EV Revolution. Available online: https://www.mckinsey.com/industries/metals-and-mining/our-insights/lithium mining-how-new-production-technologies-could-fuel-the-global-ev-revolution

Datu Buyung Agusdinata, Wenjuan Liu et al. (2018): Socio-environmental Impacts of lithium mineral extraction: Towards a research agenda; Environmnetal Research Letters. 12(2018) 123001: https: 10.1088/1748-9326/aae9b1

Ebikemefa E. Clinton & Martins Basu (2023). The benefits of Lithium Mining to Nigeria’s Economic Development. Innovare Journal of Social Sciences, 12(1), doi.org/10.22159/ijss.2024v12i1.49993.

Hayyat, Rab Nawaz, Zafat Siddiq et al. (2021): Investigation of Lithium Application and effects of organic matter on soil health; 13(4), 1705: https:// doi.org/10.3390/su13041705

Jaskula, B.W. (2018): Lithium, Mineral Commodity Summaries 2018; USGS: Reston, VA, USA, 2018; p. 1