OPTIMIZATION OF AQUEOUS-BASED FILM COATING PROCESS PARAMETERS CONTAINING GLUCOSAMINE SULFATE POTASSIUM CHLORIDE
DOI:
https://doi.org/10.22159/ijap.2019v11i4.31905Keywords:
Glucosamine sulfate potassium chloride, 32 full factorial design, Aqueous based film, Spray rate, Inlet air temperatureAbstract
Objective: The aim of the present work was to prepare film coated tablet of glucosamine sulfate potassium chloride and study the effect of coating process parameters which implicate more significant effects on an aqueous-based film coating process of tablets.
Methods: The different batches of uncoated tablets were prepared by wet granulation method. Aqueous film coating was carried out by using opadry®II white 85F18422. A 32 full factorial design was employed to study the effect of spray rate (X1) and inlet air temperature (X2) on coating uniformity, coating process efficiency and % loss on drying. The surface characteristics of the aqueous based film coated tablet were studied using a SEM. Check point batch was prepared to validate the evolved model.
Results: Preliminary trials indicated that individually process parameters affected the quality of coated tablets. Hence, studied the combined effect of these factors on the coating process required and 32 full factorial design was applied. In this study, it was seen that spray rate and inlet air temperature had a major effect on tablet coating process. It was observed from factorial batch that maximum drug release was found in batch F5.
Conclusion: The results of full factorial design indicate both parameters spray rate (X1) and inlet air temperature (X2) have significant effect on coating process and batch F5 is stable for 3 mo at accelerated condition.
Downloads
References
Sham MM, Azmi NS, Rahim MH. Review: glycosaminoglycans versus cancer. J Environ Bioremed Toxicol 2014;2:58-61.
Zahari CN, Azmi NS. Halal source of medication: glycosaminoglycan derived medicinal plant. Int J Appl Chem 2016;12:803-10.
Choocheep K, Saenkham C, Borwornchaiyarit S, Chaiisaraseree K, Chimchai J, Moonpa T. Investigation of sulfated glycosaminoglycans and their agarose gel electrophoresis patterns from plants extracts. J Assoc Med Sci 2018;51:11-8.
Vidhyanandhini R, Saravanan R, Vairamani S, Shanmugam A. The anticoagulant activity and structural characterization of fractionated and purified glycosaminoglycans from venerid clam meretrix casta. J Liq Chromatogr Related Technol 2014;37:917-29.
Lieberman H, Lachman L, Schwartz J. Pharmaceutical dosage form: tablets. Vol. 1. 2nd ed. New York: Marcel dekker; 1989. p. 214-20.
Aultan M. The science of dosage form design. 2nd ed. Spain: Churchill Livingstone; 2001. p. 133-5.
Narasimha Rao R, Anusha RM, Swetha RN, Divyasagar P, Keerthana K. Design and evaluation of metformin hydrochloride extended release tablets by direct compression. Int J Res Pharm Biomed Sci 2011;2:1118-33.
Gawali P, Gupta A, Kachare S, Kshirsagar S. Formulation and evaluation of matrix-based sustained release tablets of quetiapinefumarate and the influence of excipients on drug release. J Chem Pharm Res 2012;4:3073-81.
Carlson E, Chandler W, Galdo I, kudla T, Ta C. Automated integrated forced degradation and drug-excipients compatibility studies. J Assoc Lab Autom 2005;10:374-80.
Karin Liltorp, Trine Gorm Larsen, Birgitte Willumsen, Rene Holm. Solid state compatibility studies with tablet excipients using non thermal methods. J Pharm Biomed Anal 2011;55:424-8.
Viveksarathi K, Rajarajan R, Kannan K, Manavalan R. Dosage form design and evaluation of eperisone hydrochloride matrix film coated extended release tablets. Int J Pharm Pharm Sci 2012;4:575-81.
Swain RP, TR Kumari, S Panda. Formulation development and evaluation of sustained release ibuprofen tablets with acrylic polymers and HPMC. Int J Pharm Pharm Sci 2016;8:131-5.
Raghuram K, Srinivas M, Srinivas R. Once-daily sustained release matrix tablets of nicorandil: formulation and in vitro evaluation. AAPS PharmSciTech 2003;4:1-9.
Hadisoewignyo L, L Soegianto, M Ervina, I Wijaya, SD Santoso, N Tania, et al. Formulation development and optimization of tablet containing combination of salam and sambiloto ethanolic extracts. Int J Pharm Pharm Sci 2016;8:267-73.
Pahwa R, Gupta N. Superdisintegrants in the development of orally disintegrating tablets: a review. Int J Pharm Sci Res 2008;2:2767-80.
Yadav K, Yadav D, Srivastava A. Evaluation of hydrophilic, hydrophobic and waxy matrix excipients for sustained release tablets of venlafaxine hydrochloride. Drug Dev Ind Pharm 2013;39:1197–206.
Khar RK, Mohapatra S, Barik BB. Design and characterization of controlled release matrix tablets of zidovudine. Asian J Pharm Clin Res 2009;2:54-61.
Madgulkar AR. Formulation and optimization of sustained release tablets of venlafaxine resinates using response surface methodology. Indian J Pharm Sci 2009;71:387-94.
Lakade SH, Bhalekar MR. Formulation and evaluation of sustained release matrix tablet of anti-anginal drug influence of combination of hydrophobic and hydrophilic matrix former. Res J Pharm Technol 2008;1:410-1.
Jordan MP, Rajabi Siahboomi AR. Influence of film coatings on performance of hypromellose matrices. Eur Pharm Rev 2000;1:12-21.
Okutgen E, Jordan M, Hogan JE, Aulton ME. Effects of tablet core dimensional instability on the generation on internal stress within film coat part temperature and relative humidity variation within a tablet bed during aqueous film coating in an accela‐cota. Drug Dev Ind Pharm 1991;17:1191‐9.
Tobiska S, Kleinebudde P. Coating uniformity: influence of atomizing air pressure. Pharm Dev Technol 2003;8:39-46.
Obara S, Mc Ginity. Influence of processing variables on the properties of free films prepared from aqueous polymeric dispersions by a spray technique. Int J Pharm 1995;126:1‐10.
Aoki S. Preparation composition containing acid unstable physiologically active compound and process for producing same. U. S Patent No. US 2005/0163846 A1; 2005.
Tobiska S, Kleinbudde PA. Simple method for evaluating the mixing efficiency of a new type of pan coater. Int J Pharm 2001;224:141‐9.
Kumar S, A Nanda. Formulation, optimization and in vitro evaluation of gastroretentive mucoadhesive microspheres of furosemide. Int J Pharm Pharm Sci 2016;8:392-8.
Siepmann J, Peppas NA. Modelling of drug release from delivery systems based on hydroxypropyl methylcellulose. Adv Drug Delivery Rev 2001;48:139-57.
Costa P, Lobo JM. Modeling and comparison of dissolution profiles. Eur J Pharm Sci 2001;13:123-33.
Gohel M, Patel M, Agarwal R, Amin A, Dave R, Bariya N. Formulation design and optimization of mouth dissolving tablets of nimesulide using vacuum drying technique. AAPS PharmSciTech 2004;5:36-42.
Patel KJ, Dharamsi A. Formulation development and optimisation of controlled release microspheres of aceclofenac using response surface methodology. J Chem Pharm Res 2015;7:88-99.
Guideline ICH. Stability testing guidelines: stability testing of new drug substances and products. ICH Q1A (R2) (CPMP/ICH/2736/99); 1999.
Stability testing of new drug substances and products [Q1A (R2)]. The International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use; 2003.
Vogel AI. Vogel's textbook of quantitative chemical analysis. 5th ed. Jeffrey GH, Bassett J, Mendham J, Denney R. editors; 1989. p. 220-5.
Patel J, Shah A, Sheth N. Aqueous-based film coating of tablets: study the effect of critical process parameters. Int J Pharm Tech Res 2009;1:235-40.
Cahyadi C, Heng PWS, Chan LW. Optimization of process parameters for a quasi-continuous tablet coating system using design of experiments. AAPS PharmSciTech 2011;12:119-31.
Bolton S, Bon C. Pharmaceutical statistics: practical and clinical applications. 5th ed. Informa Healthcare; 2005. p. 472-93.
Lewis GA, Mathieu D, Phan-Tan-Luu R. Pharmaceutical experimental design. New York: Marcel Dekker; 1999. p. 191-8.
BP British Pharmacopoeia. Stationary Office 2009;2010:3045-9.
Published
How to Cite
Issue
Section
